How To Connect Sony Handycam To Computer Windows 7
Connecting the photographic camera to the computer
For the Remote shooting, stabilize the camera with a tripod or using some other method, and then connect the photographic camera to the computer.
The connection and setting methods vary depending on the model.
- ILCE-ane
- ILCE-7SM3, ILME-FX3
- ILCE-9M2/7RM4A/7RM4/7C
- ILCE-7M4
- ZV-E10
- ZV-1
- When using some other photographic camera
When using the ILCE-i
You lot can connect the camera via USB using a USB cablevision, wired LAN connectedness, or wireless W-Fi connection.
-
On the photographic camera, perform the following setting.
-
On the camera, select [PC Remote Cnct Method] from the following options.
[USB]
Connect the camera and computer using the supplied USB cablevision.
[Wired LAN]
Connect the camera and computer using a general LAN cable sold in the market. After connecting, perform pairing of the camera with the computer.
- Connect the camera and computer or switching hub using a LAN cable.
- Select [PC Remote Part] → [Pairing] to perform pairing of the camera with the Remote application.
On the camera, set [Connect without Pairing] to [Enable] to connect without pairing.
[Wi-Fi Direct]
Connect the camera and computer using Wi-Fi without passing through an access point.
- Select [PC Remote Function] → [Wi-Fi Direct Info.] to brandish an SSID and password of the camera.
- Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.
[Wi-Fi Access Bespeak]
Connect the photographic camera and computer using Wi-Fi via an access betoken. It is necessary to perform pairing of the photographic camera and figurer.
- Select (Network) → [Wi-Fi] → [WPS Push button] or [Admission Point Set.] to connect the camera and reckoner to the same access betoken.
- Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
On the camera, ready [Connect without Pairing] to [Enable] to connect without pairing.
-
On the reckoner, launch Remote .
-
In the Device selection window, select a camera to utilise for Remote Shooting past double clicking.
When using the ILCE-7SM3, ILME-FX3
Yous can connect the photographic camera via USB using a USB cablevision or via a wireless Wi-Fi connection.
-
On the camera, perform the following setting.
-
On the camera, select [PC Remote Cnct Method] from the post-obit options.
[USB]
Connect the camera and figurer using the supplied USB cable.
[Wi-Fi Direct]
Connect the photographic camera and computer using Wi-Fi without passing through an admission point.
- Select [PC Remote Function] → [Wi-Fi Direct Info.] to display an SSID and password of the photographic camera.
- Perform a Wi-Fi connection to the camera from the calculator using the displayed SSID and countersign.
[Wi-Fi Access Point]
Connect the camera and figurer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer.
- Select (Network) → [Wi-Fi] → [WPS Button] or [Access Point Set.] to connect the camera and reckoner to the same access point.
- Select [PC Remote Office] → [Pairing] to perform pairing of the camera with the Remote awarding.
-
On the figurer, launch Remote .
-
In the Device selection window, select a photographic camera to utilize for Remote Shooting by double clicking.
When using the ILCE-9M2/7RM4A/7RM4/7C
You can connect the camera via USB using a USB cable, wired LAN connection*, or wireless Westward-Fi connection.
* Supported devices: ILCE-9M2
-
On the camera, perform the following setting.
-
On the camera, select [PC Remote Cnct Method] from the following options.
[USB]
Connect the photographic camera and computer using the supplied USB cable.
[Wired LAN] (ILCE-9M2 but)
Connect the camera and reckoner using a general LAN cable sold in the market place. After connecting, perform pairing of the camera with the figurer.
- Connect the camera and computer or switching hub using a LAN cable.
- Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote awarding.
If [Connect without Pairing] is available on the camera, gear up it to [Enable] to connect without pairing.
[Wi-Fi Straight]
Connect the camera and computer using Wi-Fi without passing through an access point.
- Select [PC Remote Office] → [Wi-Fi Straight Info.] to brandish an SSID and password of the camera.
- Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.
[Wi-Fi Admission Betoken]
Connect the photographic camera and computer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and estimator.
- Select (Network) → [Wi-Fi Settings] → [WPS Push button] or [Access Point Set up.] to connect the camera and computer to the same access point.
- Select [PC Remote Office] → [Pairing] to perform pairing of the photographic camera with the Remote application.
If [Connect without Pairing] is bachelor on the photographic camera, fix it to [Enable] to connect without pairing.
-
On the estimator, launch Remote .
-
In the Device selection window, select a camera to apply for Remote Shooting by double clicking.
When using the ILCE-7M4
You lot can connect the photographic camera via USB using a USB cable or via a wireless Wi-Fi connection.
Make sure that the photographic camera is not continued to a smartphone beforehand.
-
On the camera, perform the following setting.
- MENU → (Network) →[Transfer/Remote]→[PC Remote Function]→[PC Remote]→[On]
-
On the camera, select [PC Remote Cnct Method] from the following options.
[USB]
Connect the camera and computer using the supplied USB cable.
[Wi-Fi Direct]
Connect the camera and computer using Wi-Fi without passing through an admission point.
- Select [PC Remote Function] → [Wi-Fi Directly Info.] to display an SSID and countersign of the camera.
- Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.
[Wi-Fi Access Point]
Connect the camera and computer using Wi-Fi via an access point. Information technology is necessary to perform pairing of the photographic camera and estimator.
- Select (Network) → [Wi-Fi] → [WPS Push] or [Access Point Ready.] to connect the photographic camera and computer to the aforementioned admission point.
- Select [PC Remote Function] → [Pairing] to perform pairing of the photographic camera with the Remote application.
-
On the estimator, launch Remote .
-
In the Device selection window, select a camera to use for Remote Shooting by double clicking.
When using the ZV-E10
You can connect the photographic camera via USB using a USB cable or via a wireless Wi-Fi connection.
-
On the camera, perform the post-obit setting.
-
On the camera, select [PC Remote Cnct Method] from the following options.
[USB]
Connect the camera and computer using the supplied USB cable.
[Wi-Fi Directly]
Connect the camera and calculator using Wi-Fi without passing through an access point.
- Select [PC Remote Part] → [Wi-Fi Straight Info.] to display an SSID and password of the photographic camera.
- Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.
[Wi-Fi Admission Bespeak]
Connect the photographic camera and figurer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer.
- Select (Network) → [Wi-Fi Settings] → [WPS Push] or [Access Point Gear up.] to connect the camera and computer to the same access point.
- Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
-
On the reckoner, launch Remote .
-
In the Device selection window, select a camera to utilise for Remote Shooting past double clicking.
When using the ZV-1
You tin connect the camera via USB connection using a USB cable.
-
Use the MENU on the camera to perform the following setting.
-
Connect the camera to the computer using a USB cable.
" Connecting... " will appear on the monitor of the camera.
-
On the calculator, launch Remote .
-
In the Device selection window, select a photographic camera to use for Remote Shooting by double clicking.
When using some other photographic camera
You tin can connect the camera via USB connectedness using a USB cable.
* The displayed terms may differ depending on the photographic camera.
-
Employ the MENU on the camera to perform the following setting.
-
Connect the camera to the estimator using a USB cable.
" Connecting... " volition announced on the monitor of the camera.
-
On the computer, launch Remote .
-
In the Device selection window, select a photographic camera to utilize for Remote Shooting past double clicking.
Was this article helpful?
We are holding a simple survey to further ameliorate our services. If yous could answer the survey, it would be much appreciated.
Your responses will be used to further develop and improve our products/services. The survey responses volition be processed statistically and will non be disclosed in a style in which an individual tin be distinguished.
Source: https://support.d-imaging.sony.co.jp/app/imagingedge/en/instruction/4_1_connection.php
Posted by: pattersoncalk1984.blogspot.com
0 Response to "How To Connect Sony Handycam To Computer Windows 7"
Post a Comment